Unparalleled Energy & Maintenance Savings
Induction Lighting is, “a market ready, cost effective solution for quick energy savings."
- US Department Of Energy
Modern Induction lighting technology will cut your lighting energy cost in half while dramatically reducing relamping costs and landfill mass, collectively giving you the lowest Carbon Footprint achievable. And Induction lighting produces twice as many lumens per watt as traditional sources. Are you “ready”?
Global Induction Lighting US is a leader in Induction lighting with 22 years of manufacturing experience and customers in the Western Hemisphere, Europe, the Middle East and Asia. From 10 below zero to the 125 degree heat of an Arabian desert, from highways to subways, parking garages to warehouses our Induction lights provide a 50% reduction in electrical use, 100,000 life and a better quality of light. The installation of Induction fixtures contributes points to those buildings seeking LEED certification.
Explore our web site and learn how Global Induction Lighting US can change the way you light your world.
Latest USAF Lighting Guidelines for LED: Still a restricted use lighting
8.1. Prior to authorizing any LED lighting project, the base energy manager and MAJCOM electrical engineer or MAJCOM energy manager shall review and approve the calculation methods, assumptions, and resulting justification for the proposed LED lighting project
8.2 LED lighting project approval shall be based on... a positive ROI, or if there are opportunities with a higher ROI, then the investment should not be undertaken.
Full Report >>
In many lighting applications, Global Induction Lighting will provide a higher ROI.
Why Does Thermal Management Matter
Excess heat directly affects both short-term and long-term LED performance. … Estimated useful life (defined as 70% of initial lumen output) decreased from ~37,000 hours to ~16,000 hours, a 57% reduction, with the 11 degree C temperature increase. Full Article >> |
Building Technologies Program
Induction is a market-ready, cost effective solution for quick energy savings.
Full Article >> |
Lumen Depreciation
… high quality florescent lamps [induction] using rare earth phosphors will lose only 5 - 10% of initial lumens at 20,000 hours of operation. Full Article >> |
FREE DOE Life-Cycle Cost Program
The National Institute of Standards and Technology (NIST) developed the Building Life-Cycle Cost (BLCC) Program to provide computational support for the analysis of capital investments in buildings. Full Article >> |
Old Lighting Technology Made New
WIPP's [DOE Waste Isolation Pilot Plant] first induction lighting system was installed in 1998, replacing high-pressure sodium (HPS) lights. More than 10 years later, all but three of the original 36 induction units are still operating after more than 88,000 hours of continuous, 24/7 operation. Full Article >> |
|
 
The only meter that measures today’s high Kelvin, energy efficient light sources using Dr. Sam Berman’s DOE endorsed calculations to guarantee accuracy. Ensure the accuracy of your light readings with a Solar Meter.
Learn More >> |
Global Induction Lighting and the lighting manufacturer warrants all lamps and ballasts to be free from defective materials and workmanship, under normal and proper installation (by a qualified and licensed electrician). Global products have a warranty of 10 years or 60,000 hours, whichever occurs first, on both lamp and ballast & 100,000-hour rated lamp life from the date of invoice. This limited warranty applies to all products 40 watts and over.
Download Warranty
Download Return Policy |
|
